This master theses deals with different methods for automatic tuning of the existing controller for external axis. Three methods for automatic tuning have been investigated. Two of these are based on the manuell method used today. The third method is based on optimal placement of the dominant poles. Different sensitivity functions are important for this method.

The principal aim of this thesis is to test if extracts, produced by the automatic summarizer "Copernic Summarizer", are possible to use as abstracts. The aim is also to give a picture of what automatic summarization is and why it is motivated. Three questions are asked: What is automatic summarization and what can it be used for? Is it possible to replace the author-written abstracts with extracts from "Copernic Summarizer"? Is automatic summarization motivated for the different areas of use that are identified in the first question? An automatic summarizer is a program that is intended to summarize text automatically and it can be used for different purposes, for example for summarizing WebPages or scientific articles. To answer the second question an experiment is carried out.

This paper investigates the automatic stabilizer and the underlying factors behind its function. The paper includes both a literature review and an empirical analysis. The literature review discusses the IS-LM and Mundell-Fleming models and different ways to quantify the automatic stabilizer. Based on the theory, the relationship between volatility in GDP and the size of the automatic stabilizers is then analyzed with the help of regressions. Our main result shows a negative relation between these two variables.

Computers and business systems are used more frequently in a world where IT gradually is taking over. This is also true when it comes to the real estate valuation process where actors on the Swedish real estate market are using automatic valuation systems for real estate appraisal. But the real estate agents have not yet seen the charm in using these automatic valuation systems for real estate appraisal. Can the real estate agents also use the automatic valuation systems? We developed our three main subjects: the valuation process, an automatic valuation system and the real estate market with assistance from scientific articles.

In information retrieval there is a problem with ambiguous words. To solve this problem word sense disambiguation WSD is used. Few studies combining information retrieval and word sense disambiguation have been conducted with Swedish words. The purpose of this thesis has been divided in two. The first purpose was to examine Swedish information retrieval and disambiguation in the query phase.

The web has made an incredible amount of unorganized information available to anyone. There are search engines that help us structuring the information, but it is still difficult to find what you search for on the web. The purpose of this master's thesis is to investigate whether the already existing techniques for automatic indexing are suited for the new information retrieval context on the web and how the choice to support these techniques, or not, affects the search results. This is examined through a literature study on automatic indexing and other related concepts, such as information retrieval and information searching on the web in order to get a theoretical frame to the work and by an observation of the search engine HotBot to approach the purpose of the thesis. The observation is carried out by searching HotBot's database and investigating the search results in order to try to identify patterns that can reveal something about how HotBot's automatic indexing is done.

Automatic trimmerhead is an examination project for making an automatic trimmerhead for grass trimmers with the user and functionality in focus. Our perception is that a happy user is a user who can pick up his or her trimmer, use it and put it back to its place when the job is done. It should not be necessary to interrupt work and perform maintenance on the machine just to make it work as promised.The project has been made in collaboration with the company Husqvarna, which is one of the biggest actors dealing with garden machinery on the market. Together we determined the project goal, ?To invent, construct and test a brand new concept for how an automatic trimmerhead can look and function?.At this day there are several different automatic trimmerheads on the market, both semi and fully automatic.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

This master thesis covers the development of an automatic tuning process for the existing speed controller for drive systems. The drive systems are resonant two-mass systems where a motor is used to drive a load connected by a shaft. The developed method relies heavily on system identification and the construction of a complete mechanical model of the process. With this approach, the common problem with poor load speed control that derives from measuring only the motor speed can be addressed and solved for a majority of such processes.The automatic tuning method has along with general test functions been implemented in a complete tool for automatic tuning, testing and performance evaluation and reporting for drive systems..

Tången 2 is a building situated in Stockholm, Sweden. It´s built in the 1930s and contains both residences and businesses. The property owner, Diligentia AB, wants to lower the energy use in Tången 2. This report consists of an energy audit which clarifies the specific circumstances linked to Tången 2. Collected knowledge is then used, together with the results from the literature study, to decide energy measures to proceed with.

This thesis examines what automatic indexing and genre classification may bring to fiction. The thesis studies five theorists of the subject to find out what the biggest problems are concerning fiction indexing. The thesis also investigates which automatic text analysis methods that can be effective for automatic indexing and genre classifying fiction. To show that it is possible according to philosophy of language to index fiction, in particular to automatically index it. Wittgenstein?s, Barthes? and Ricoeur?s language and fiction theories are presented and used to problemize the subject.

This thesis describes new methods for automatic crack detection in pavements. Cracks in pavements can be used as an early indication for the need of reparation.Automatic crack detection is preferable compared to manual inventory; the repeatability can be better, the inventory can be done at a higher speed and can be done without interruption of the traffic.The automatic and semi-automatic crack detection systems that exist today use Image Analysis methods. There are today powerful methods available in the area of Computer Vision. These methods work in higher dimensions with greater complexity and generate measures of local signal properties, while Image Analyses methods for crack detection use morphological operations on binary images.Methods for digitalizing video data on VHS-cassettes and stitching images from nearby frames have been developed.Four methods for crack detection have been evaluated, and two of them have been used to form a crack detection and classification program implemented in the calculation program Matlab.One image set was used during the implementation and another image set was used for validation. The crack detection system did perform correct detection on 99.2 percent when analysing the images which were used during implementation.

The number of people in the world and the urbanization increases. This leads to a bigger need of space for the built environment, space that soon doesn?t exist. A large portion of humanity?s energy disposal is used for heating of buildings.